Step 1: Lay all pieces face down on a soft blanket, in the right order. Skip to Step 3 if your art is one piece.
Step 2: Join the pieces.
- Wood joint: push the joint into the slot until the pieces sit flat.
- or Screws: line up the holes and screw in until snug.
Step 3: Hold the art on the wall and mark the top centre with a pencil.
Step 4: Mark the screw positions on the wall, using a spirit level.
- Screw hangers: copy the distance between the hangers on the back.
- or Cleat: hold the wall cleat level and mark through its holes.
Step 5: Drill the holes and insert wall plugs.
Step 6: Fix the hardware to the wall.
- Screw hangers: screw in, leaving about 5 mm out.
- Cleat: screw the wall cleat on, angled edge up and facing the wall.
Step 7: Hang the art on the screws, or lower it onto the cleat until it locks. Check it is level.